508: Loop Detected

Bounce Sequencer PCB+Panel – Pushbutton version


Out of stock

SKU: bounce-pcb-buttons Categories: , Tag:


An 8-step sequencer with a playable (pushbuttons/toggle switches) interface. Toggle switch selects up / down / or bounce mode. In up or down mode, selecting any two switches will cause the sequencer to skip the steps between them (either between them on the inside, or between them on the outside, depending).

In bounce mode, any lit step will cause the sequencer to reverse direction when it hits it.

There’s a toggle to select ~2 octave or ~3 octave range, and a hold/run toggle.

In addition to the main clock input and the main sequence CV output, there are three additional outputs:

  • CV from odd-numbered steps only
  • CV from even-numbered steps only
  • a one-half division of the clock

There is an expansion bus on the back for driving the optional 8-step trigger sequencer, and the optional variable gates module.

All build information — schematics, BOMs, etc — is on github: https://github.com/508-loop-detected/bounce-sequencer

You may also like…